• Patented articulating frame constructed of aircraft-grade aluminum for strength and durability in extreme cold weather environments – No loose components to assemble or lose – Designed for rapid deployment in cold weather gear – Eliminates the need for pre-bent or extension poles

• Dual layer construction – Completely weatherproof yet breathable enclosure – Ample ventilation prevents moisture/condensation buildup on interior shelter surfaces – Venting, stove pipe, and heater accommodations – All fabrics used are resistant to deteriorating effects of rot, fungus, mildew, and corrosion in both operational and storage conditions, wet or dry in accordance with AATCC 30

• Two lightweight fabric flies provide camouflage for woodland and snow-covered environments – Constructed of weather-resistant fabric to provide additional environmental protection and insulation with no impact on size, weight, or cube

• Outer cover easily attached to freestanding shelter frame by 2 – 3 personnel in cold weather gear

• Provides 66″ (167.6 cm) diameter area for safe heater location in center of shelter • Two duct portals accommodate 12″ (30.5 cm) diameter ducts and close securely when not in use

• 80″ (203.2 cm) interior peak height allows easy maneuverability

• Hybrid dome shape works well in battling winds in high elevation and arctic environments – Tested to 50 mph (80.47 kph) sustained winds and 55 mph (88.5 kph) wind gusts

• Superior snow shed and snow load capacity; tested to 4 lbs/sq-ft (0.19 kPa)

• Drash model 2s 
• Like new
• Tan
• Length: Interior 16.5, Exterior: 18.5
• Width: Interior: 11.5, Exterior: 13.5
• Hight: Interior: 8.3, Exterior: 10.6
• Weight: 313 LBS
• NSN:8340-01-395-39756

Color: OD

HDT Base-X 61BV02TN Blackout Vestibule Rapid Entry Boot Military Tent Part. This item is fantastic for entry and exit to a larger tent or hallway between tents. There are openings on 2 sides of the unit. Works great as a mobile shower.

Features of the Tent:

• Condition: Used
• Vestibules are very heavy duty
• Duel Layer Insulated Flooring and sides
• Approximate Weight: 80lbs
• Approximate Size: 4′ L x 4′ W x  8′ H
• Includes:
• 4 poles
• 6 tent stakes
• Vestibule

• Soldier crew tent
• 10′ 10″ by 10′ 10″ at base, 53″ tall
• Comes with interior liner
• 4″ stove jack
• fire and water resistant
• Like new: $425.00
• Used complete: $349.00
• Used (no liner): $295.00

FEATURES & BENEFITS

• EASE OF DEPLOYMENT: All of the TM shelter
models are rapid-deploying with average setup times
between 5-15 minutes with minimal people and no
tools or ladders. The setup procedures are simple
and intuitive and require a minimal amount of training.
This is all made possible because of the unique rope
and pulley system. The systems allow the frame to be
setup first allowing the fabric to be hoisted into place
below the frame, eliminating the requirement to lift
both the frame and fabric simultaneously. Having the
frame external to the outer fabric allows for a thermal
fly to be installed on top of the frame which creates
additional environmental protection.
*Shelter shown without thermal fly.

• PROVEN: UTS shelters meet or exceed all DOD
standards for environmental performance. Testing
has been successfully completed for snow load, wind
load, driving rain, blackout, durability, sand, dust, and
salt fog.

• MISSION READINESS: Each UTS shelter comes
equipped with integral ECU ducting, electrical outlets
and remain inside the shelter during takedown and
pack out. The optional lighting can also be left integral
to the shelter during takedown and pack out.

• DURABILITY: All aspects of the shelter are designed
to be rugged and durable. The frame is built with
robust components that are high strength offering
trouble free setup. The fabric components are
manufactured using the highest quality products
with the most modern fabrication techniques.

• MODULAR: The shelters come in various sizes that
can be interconnected to create larger complexes to
meet the mission needs.

• THERMAL EFFICIENCY: The shelter has a very
energy efficient design with a standard liner and
thermal fly. Additional thermal efficiency can be
achieved using the optional insulated liners.

©2024 UTS Systems, LLC
Current as of August 2024. Information subject to change without notice.

INTERIOR DIMENSIONS:

19’0″ x 10’2″ x 6’9″ – Eave, 9’1″ – Peak

USEABLE FLOOR SPACE:

194 ft2

DEPLOYMENT TIME:

Setup with 2 people in 3–5 minutes

STRIKE TIME:

Strike with 2 people in 3–5 minutes

PORTABILITY/WEIGHT:

(IN BAGS)
Tent Fabric: 205 lbs (incl. Insulated Liner, Floor & Repair Kit)
Roof Frame: 127 lbs
Side Arches: (incl. with Roof Frame)
Thermal Fly: 69 lbs
Total Weight: 401lbs

PACKED DIMENSIONS:

(L X W X H INCHES)
Tent Fabric: 78 x 30 x 18
Roof Frame: 92 x 20 x 8
Side Arches: (incl. with Roof Frame)
Thermal Fly: 35 x 27 x 5
Total Volume: 36 ft³ Total Volume: 36 ft³
COMPLEXING End Doors, End Walls, (optional) Side Doors
PASS-THROUGH PORTS/
SLEEVES ECU/Cable ducts on both end walls
WINDOWS Standard
SHELTER MATERIAL &
SUB-FLOOR Meets MIL-PRF-44103
HANGING MECHANISMS 100 lbs each; Interior Hang Points
INTERIOR ELECTRICAL Standard Equipment; Interior shelter cord with lighted triple tap